Home > Products > > FCPC® Automatic Station > FCPC® Industrial Automatic Station

FCPC® Industrial Automatic Station

The  FCPC® industrial automatic station, available from 5L (mono-rotor)  to more than 20 L (bi-rotors)  volume, allows rotor adaptation. The panel controls the whole system,  from injection to collection and detection. ATEX and cGMP standards.

 FCPC® Industrial Automatic Station
 Rotor volume
from 5L to + 20 L
Injected mass
from 0.5 to 1 kg/run
Flow rate
from 0.4 to 1 L/min
Rotation speed 
from 400 to 1500 rpm
Separation time 
from 45 min to 1h 

             Mono - rotor dimensions  

             (weight - H x  L x  w)  

              1120 kg - 1.06 x 1.90 x 0.62 m
Bi -rotor dimensions  
(weight - H x  L x  w)  
1960 kg - 1.06 x 1.66 x 1.24 m
             Pump

            2 heads, piston
            Flow rate 1-1500 ml/min
            Max. pressure 150 bar
            Motor regulation by frequency changer
            Solenoid valve for gradient             Set 4 pieces
            Low pressure
            Max. flow 3000ml/min
            Max.pressure 2 bar
            Fraction collector carusell

            Fraction volume up to 1000 ml each
            20 fractions + 2 waste outputs
            Explosion proof engine
            UV detector cell holder on
            UV diode array detector             4 wavelengths simultaenous in one cell
            200-600 nm with prep. high flow cell
            Optical cable 10 m with connectors
 FCPC® Control Panel
Interface
Pressure, flow rate, temperature and flow temperature, bearings temperature, rotation speed controls
Modem
Updating of software/systems
Distant repairing
Batch control saving for cGMP standards
Security
Automatic door lock
FCPC® Explosion-proof in ATEX zone 2
cGMP standards compatibility
15 m alimentation and detection cables
Screen
17" touch-sensitive screen to control all parameters
            Dimensions             0.69 x 0.60 x 1.00 m

 

Information about Product Details